Posted on

How to Make… Doily Laser Cut Lace Wedding Range

Doily Laser Cut Lace Wedding

Doily Laser Cut Lace Wedding Range

I love our Doily Laser Cut Lace Wedding range of Stationery.
By combining it with some subtle prints and embellishments, you can create something really special.

LASER CUT INVITATION

 

doily lace laser cut wedding invitation

dily lace laser cut wedding invitation 2

To make this stunning wedding
invitation you will need:

1 Large Matt Off White Doily Pocket BUY
2/3 sheet Kraft Floral Lace Paper BUY
2 x Small Pearl and Crystal Round – Rose Gold BUY
1 x Row of Horizon Pearl Stickers BUY

Other items you may wish to consider:

Double Sided Tape BUY
Paper Trimmer / Scorer BUY
Hot Melt Glue Gun BUY

LASER CUT INVITATION

– Print your wording on to a sheet of A4 Kraft Floral Lace Paper (Make sure you leave a gap somewhere towards the top so that the row of pearls will fit neatly). Cut down to size. The fished size of your wording panel should be 18cm x 14.9cm.
– Use double sided tape to stick the invitation panel to the inside of the Doily Pocket.
– Peel off a row of Horizon Pearl Stickers and press in to place on the invitation panel.
– Use your hot melt glue gun to carefully stick the Small Crystal and Pearl Round Embellishments in to place on each side of the flap (at the centre of the circles).
TIP – Apply the glue to the embellishments, NOT to the card!

(You will need to allow 1 sheet of Kraft floral Lace paper per invitation BUT you should have plenty of the Paper left over to make some of the other items)

 

INVITATION WRAP

dily lace laser cut wedding invitation wrap

To make this gorgeous wedding
invitation you will need:

1 Matt Off White Doily Wrap BUY
1/2 sheet Kraft Floral Lace Paper BUY
1 x Emma Embellishment – Rose Gold BUY
1 x Row of 4mm Pearl Rows BUY
1/2 Sheet Kraft Card BUY

Other items you may wish to consider:

Double Sided Tape BUY
Paper Trimmer / Scorer BUY
Hot Melt Glue Gun BUY

INVITATION WRAP

– Print your wording on to a sheet of A4 Kraft Floral Lace. Cut to size. The finished invitation panel should measure appx. 18cm x 12.5cm. You should be able to print 2 invitation panels on to each A4 sheet of paper.
– Cut a piece of Kraft Card to 18cm x 12.5cm.
– Use double sided tape to stick the invitation panel on to the Kraft Card. (This will give your invitation added strength)

– Fold the invitation wrap along the crease lines. Use double sided tape to stick the ends of the Doily Invitation Wrap together.
– Use the hot melt glue gun to stick your embellishment in to place at the top centre of your wrap.
– Peel off a row of 4m self adhesive pearls. Press them in to place along the bottom of the invitation wrap.

– Slot your invitation inside the invitation wrap.

 

RSVP CARD

dily lace laser cut wedding stationery rsvp card

To make this striking RSVP card, you will need:

1 Matt Off White Doily RSVP Card BUY
1/4 sheet Kraft Floral Lace Paper BUY
1 x 3mm Self Adhesive Pearl BUY
1/4 Sheet Kraft Card BUY

Other items you may wish to consider:

Double Sided Tape BUY
Paper Trimmer / Scorer BUY

RSVP CARD

– Print your wording directly on to the RSVP card. (You will need to adjust your printer settings for this)
– Cut a piece of Kraft Card to 12cm x 9cm.
– Cut a piece of Kraft Floral Lace to 12cm x 9cm. Use double sided tape to stick on top of the Kraft Card.
– Use double sided tape to stick your printed RSVP card on to the background Floral Lace.
– Peel off a 3mm Self Adhesive Pearl and stick in to place on the front of the RSVP card.

 

FAVOUR BOX

dily lace laser cut wedding stationery favour box

To make this striking wedding
favour box you will need:

1 Matt Off White Doily Favour Box BUY
1/4 sheet Kraft Floral Lace Paper BUY
3 x Row of Horizon Pearl Stickers BUY

Other items you may wish to consider:

Double Sided Tape Pen BUY
Paper Trimmer / Scorer BUY

FAVOUR BOX

– Cut 3 pieces of floral lace paper 5.5cm x 5.5cm.
– Place the flat favour box face down on a flat surface (the raised creases should be facing you). Use the double sided tape dispenser to stick the floral lace paper in to place behind each of the laser cut panels. Run the tape around the outside of the laser cut panels and press the printed paper in to place (you should be looking at the plain side of the paper as you do this)

– Using a piece of scrap card, carefully draw around one of the top flaps of the favour box (not including the butterfly section at the top). Cut around your template, making it SLIGHTLY smaller by cutting just inside the lines. Use this template to cut 2 pieces of Kraft Floral Lace paper the same size and shape.

– Using the method above, stick the Kraft Floral Lace in to place behind the laser cut panels on on the top of the favour box.

– Peel of a row of Horizon Pearl Stickers. Trim off any pearls that might make the row too long. Press in to place across the centre of one of the laser cut panels at the bottom of the favour box. Repeat this process until all the laser cut panels at the bottom of the box have a row of pearls.

– Assemble your box and fill with lovely things!

 

PLACECARD

dily lace laser cut wedding stationery placecard

To make this beautiful placecard, you will need:

1 Matt Off White Doily Placecard BUY
1 x Emma Embellishment – Rose Gold BUY
1 x Cream Bow BUY

Other items you may wish to consider:

Hot Melt Glue Gun BUY

PLACECARD

– Fold your placecard
– Use a hot melt glue gun to stick your pre-tied bow in to place at the top centre of the card.
– Use a hot melt glue gun to stick the embellishment on top of the bow!

 

ORDER OF SERVICE

dily lace laser cut wedding stationery order of service menu cover

To make this lovely Order of service you will need:

1 Matt Off White Doily Order of Service Cover BUY
1/3 sheet Kraft Floral Lace Paper BUY
1 x Small Pearl and Crystal Round – Rose Gold BUY
Matt Off White Paper for insert (as many sheets as you might need to print your booklet wording on to) BUY

Other items you may wish to consider:

Double Sided Tape BUY
Paper Trimmer / Scorer BUY
Hot Melt Glue Gun BUY

 

70cm double sided satin ribbon (to make your own bows) BUY
 OR ready made Dior Bows BUY

ORDER OF SERVICE

– Cut a piece of Kraft Floral Lace 5cm x 22cm. Use double sided tape to stick it in to place on the front left of your Order of Service Cover.

– Cut a piece of Kraft Floral Lace 22cm x 9cm. Open up your Order of service cover and place it face down on a flat surface with the laser cut panel in the top left. Use double sided tape to stick the Kraft Floral Lace in to place at the left side of the Cover. Make sure that the Kraft floral lace is face down (so that the pattern shows from the front)

– At the front of the card, run a line of double sided tape down the card, right next to the printed paper panel. Press your satin ribbon on to the double sided tape, making sure that you have enough length at the top and bottom to wrap it around the back of the card.
– Wrap the ribbon around the back and use your glue gun to carefully glue both ends neatly in to place. Trim off any excess.

– Make a single dior bow from your satin ribbon. (You can use these instructions if you are unsure!)

how to make dior bow video
– Stick the dior bow in to place on top of the ribbon at the front of the card.
– Use the hot melt glue gun to stick your embellishment on top of the dior bow.

– Your cover is now finished. You can print your order of service wording on to A4 sheets (it is best to trim them down by at least 5mm on each side). You can place the wording inside your order of service covers by either using a long arm stapler OR hand tying them with 3mm satin ribbon OR hemp cord.

 

THANK YOU CARD

dily lace laser cut wedding stationery thank you card

As a final finishing touch, to make this lovely thank you card, you will need:

1 Matt Off White Doily Thank You Card BUY
1/4 sheet Kraft Floral Lace Paper BUY
1 x Small Pearl and Crystal Round – Rose Gold BUY

Other items you may wish to consider:

Double Sided Tape BUY
Paper Trimmer / Scorer BUY
Hot Melt Glue Gun BUY

 

 40cm double sided satin ribbon (to make your own bows) BUY
 OR ready made Dior Bows BUY

THANK YOU CARD

– Make a small single dior bow from your satin ribbon. (You can use these instructions if you are unsure!)

how to make dior bow video
– Stick a line of double sided tape across the front of your thank you card, just above the laser cut pattern. Press your satin ribbon in to place on top of the double sided tape, making sure that you have enough length at the top and bottom to wrap it around the back of the card.
– Wrap the ribbon around the back and use your glue gun to carefully glue both ends neatly in to place. Trim off any excess.

– Cut a piece of Kraft Floral Lace Paper to 12cm x 12cm
– Place your thank you card face down on a flat surface. Use double sided tape to stick the Kraft Floral Lace in to place behind the laser cut section of the card. Make sure that the pattern is showing at the front.

– At the front of your card, stick your dior bow in to place using the hot melt glue gun. The bow should be stick to the centre of your ribbon.
– Use your hot melt glue gun to stick your embellishment on top of your bow.

Doily Lace Laser Cut Wedding stationery invitation range