Posted on

How To Make – Winter Theme Wedding Stationery with Snowflakes

Make your own Winter Theme Wedding Stationery and DIY wedding stationery with snowflakes. Navy and white wedding stationery for winter wedding

Make Winter Theme Wedding Stationery with Snowflakes

Winter is such a great time of year to get married. And what winter bride doesn’t hope for a bit of snow?
With this gorgeous DIY range of our winter theme wedding stationery, you can get your guests properly in the mood for your big day by introducing your own bit of snowy charm!

Besides I’m pleased to say that this range is not too tricky to make and is also fairly low cost.
By changing the colour of the card, you can easily theme this range in to coordinate with your own special day.
Why not give it a go?

how to make your own winter wedding stationery. DIY winter wedding stationery ideas. DIY wedding invitations and stationery with snowflakes.

So Here Are The Instructions……

How to make your own winter wedding invitation. DIY wedding invitation with snowflake in navy and white

INVITATION

You Will Need:

Silver snowflake charm. Dangly silver snowflake. Small hanging snowflake for decorating cards and DIY wedding stationery 1 x Neve Charm

 

BUY
Double Sided Satin Metallic Ribbon Bright White/Silver 15mm 15cm Double Sided Satin Metallic Ribbon
Bright White / Silver

BUY
  1/2 sheet of Ice Maiden Paper in white  BUY
Pearlised Navy A4 Card. DIY wedding stationery, card making and paper crafts 1 sheet of Pearlised Navy Card BUY
4mm stick on crystals for decorating wedding invitations, stationery, card making and paper crafts 1 x 4mm self adhesive crystal BUY

 

You Will Also Need:

 

Tools_270x250 Paper Trimmer BUY
Useful_270x250 Tape Runner or Double Sided Tape BUY
Useful_270x250

Glue Gun

BUY

Instructions

  1. Firstly print your wording on to Ice Maiden White Paper and Cut to size. The finished size should be 9cm x 19.5cm. Make sure you leave a gap of at least 6cm at the top for the Neve charm. You should be able to fit 2 panels on each sheet if you lay it out on a landscape format.
    (Please note that you will need to use a laser printer to print effectively onto the patterned paper. If you are using an inkjet printer, you might want to replace the patterned pearlised paper for a matt white paper instead)
  2. Secondly cut then 3 pieces of Pearlised Navy Card to the following sizes:

    – 21cm x 10.5cm
    – 20.5cm x 10cm
    – 19.5cm x 9cm

  3. After that stick your invitation wording on top of the smallest card panel using a tape runner or double sided tape.
  4. Then thread the Neve charm on to the ribbon (I’m sure you want to thread it through easily. Therefore it is helpful if you cut one end of the ribbon into a slight point).
    Push the charm to the centre of the ribbon. Then twist the ribbon so that one half is showing the white side and the other half is showing the silver side (see image).
    Hold the charm against the card in the place you would like it to fall.  Holding the charm in place, turn the card over and glue the loose ends of ribbon in to place at the back of the card using the glue gun. Make sure that you pull the ribbon tightly so that you do not have too much slack on the front.
  5. Stick the medium navy card panel on to the large navy card panel using a tape runner or double sided tape.
  6. Stick the invitation panel on top using again double sided tape. Additionally it is helpful to use also a little glue from the glue gun on the ribbon so that this holds securely against the card.
  7. Lastly all you have to do now is peel of a self adhesive crystal and stick it in to place!

 

RSVP Card

 

You Will Need:

 

1/4 Sheet of Ice Maiden White BUY
Pearlised Navy A4 Card. DIY wedding stationery, card making and paper crafts 1/2 sheet of pearlised navy card BUY
 4mm stick on crystals for decorating wedding invitations, stationery, card making and paper crafts 1 x 4mm self adhesive crystal  BUY
White RSVP envelope BUY

 

You Will Also Need:

 

Tools_270x250 Paper Trimmer BUY
Useful_270x250 Tape Runner or Double Sided Tape BUY

Instructions:

  1. Firstly print your wording on to Ice Maiden Paper and Cut to size. The finished size should be 10cm wide x 7.5cm high. You should be able to fit 4 panels on each sheet of paper if you lay it out carefully.
  2. Cut 2 pieces of Pearlised Navy Card:

    – 11.5cm x 9cm
    – 11cm x 8.5cm

  3. Use your double sided tape or tape runner to layer the smaller card on top of the larger card, making sure your borders are even.
    Stick your printed RSVP panel on top of the middle layer.
  4. Lastly peel of a self adhesive crystal and stick in to place on the printed panel.

 

make your own order of service for a winter wedding. Navy and white DIY wedding stationery with snowflakes

ORDER OF SERVICE

You Will Need:

Pearlised Navy A4 Card. DIY wedding stationery, card making and paper crafts 2 Sheet of Pearlised Navy A4 Card

 

BUY
1 /2 Sheet of Ice Maiden White Paper BUY
 Double Sided Satin Metallic Ribbon Bright White/Silver 15mm 10cm Double Sided Satin Metallic Ribbon
Bright White / Silver
 BUY
Silver snowflake charm. Dangly silver snowflake. Small hanging snowflake for decorating cards and DIY wedding stationery 1 Neve Charm BUY
small rows of stick on crystals for decorating wedding invitations and wedding stationery 1 row of Horizon Self Adhesive Crystals BUY

 

You Will Also Need:

Tools_270x250 Paper Trimmer BUY
Tools_270x250 Scoring blade BUY
Useful_270x250

Tape Runner or Double Sided Tape

BUY
Useful_270x250

Hot Melt Glue Gun

BUY

ALSO:  A Long Arm Stapler, A Hole Punch, A pencil and A ruler

Instructions:

  1. Firstly cut your pearlised navy card to 21cm x 29cm. Score and fold in half. This will form your order of service cover.
  2. Secondly print your front panel on to Ice Maiden Paper and cut down to size.  Make sure you leave a gap of appx. 7cm at the top.  The finished size should be 13cm x 19.5cm.  You should be able to fit 2 panels on to each A4 sheet.
  3. Cut then 2 pieces of Pearlised Navy Card:

    – 20cm x 13.5cm
    – 19.5cm x 13cm

  4. After that stick your printed panel onto the smaller pearlised navy panel.
  5. Use your pencil and ruler to make 2 marks on your  panel where you will punch the holes.  One each side, the mark should be 3cm from the side and 2cm from the top.  Use your hole punch to punch holes where you have marked.
  6. Thread the Neve charm on to the ribbon (it is helpful if you cut one end of the ribbon into a slight point so that you can thread it through more easily).
    Push the charm to the centre of the ribbon.  Twist the ribbon so that one half is showing the white side and the other half is showing the silver side (see image).
  7. Holding the Neve charm in between the punched holes at the front of the panel, thread each end of the ribbon through the holes you have punched.
    Pulling the ribbon tight, use your glue gun to secure it in place at the back of the panel.
  8. Stick the large navy card panel on to the front of your order of service cover.
  9. Stick the wording panel on top with double sided tape or a tape runner.  Use a small amount of glue from the glue gun at make sure the ribbon sticks firmly.
  10. Peel off a row of horizon crystal stickers and press in to place on the front of the printed panel.
  11. Lastly print your order of service wording on to A4 paper and cut to size. The finished size should be 20cm x 28cm. Fold in half and use a long arm stapler to secure the wording to the inside of the cover. Do this carefully to make sure that the staples sit along the crease.

 

 

PLACE CARD

You Will Need:

Pearlised Navy A4 Card. DIY wedding stationery, card making and paper crafts 1/8 sheet of Pearlised navy Card BUY
1/8 sheet of Ice Maiden Paper BUY
 Silver snowflake charm. Dangly silver snowflake. Small hanging snowflake for decorating cards and DIY wedding stationery 1 x Neve charm  BUY
Double Sided Satin Metallic Ribbon Bright White/Silver 15mm 20 cm Double Sided Satin Metallic Ribbon
Bright White / Silver
BUY
4mm stick on crystals for decorating wedding invitations, stationery, card making and paper crafts 1 x 4mm self adhesive crystal BUY

 

You Will Also Need:

 

Tools_270x250 Paper Trimmer BUY
Useful_270x250 Tape Runner or Double Sided Tape BUY

Also …….. a Hole Punch and a sharp Scissors

Instructions:

Before you start your name tags, it’s useful to make 2 templates.

1 – Cut a piece of paper 6.5cm x 11cm. Fold in half lengthways and with the paper folded, use a scissors to cut off the top corner (2cm from the top). When you open the paper, it should leave you with a tag shape. You can use this as a template for your tags.

2 – Cut again a piece of paper 6cm x 10.5cm. Fold it then in half lengthways and with the paper folded, use a scissors to cut off the top corner (2cm from the top). When you open the paper, it should leave you with a tag shape that is ever so slightly smaller than the one you just made.

  1. First of all cut a piece of Pearlised Navy Card 6.5cm x 11cm. Hold the larger paper template against it and cut off the top edges of card to match the template.
  2. Secondly print your names on to the Ice Maiden Paper and cut down to size.  The finished size should be 6cm x 10.5cm.  Hold the smaller paper template against it and cut off the top edges of paper to match the template.
  3. Use the tape runner or double sided tape to stick the printed name panel on top of the navy card.
  4. Use a hole punch to punch a hole in the top of your tag.  The hole should be in the centre, appx. 1cm from the top.
  5. Fold your ribbon in half and push the loop through the hole in the card (from the back to the front so that the loop is at the front of the card).  Feel the loop through the hole in the charm.
  6. Feed the loose ends of the ribbon through the loop and pull tightly.  You might need to feed this carefully through the loop of the charm so that it doesn’t tear the top of your card.
  7. Lastly use a scissors to cut the ends of the ribbon in to a neat point.

 

DIY winter wedding stationery ideas. Make your own thank you cards with snowflakes. Winter wedding ideas

THANK YOU CARD

You Will Need:

 

Pearlised Navy A4 Card. DIY wedding stationery, card making and paper crafts 2/3 sheets of Pearlised Navy Card

 

BUY
1/4 sheet of Ice Maiden paper BUY
 Silver snowflake charm. Dangly silver snowflake. Small hanging snowflake for decorating cards and DIY wedding stationery 1 x Neve Charm  BUY
Double Sided Satin Metallic Ribbon Bright White/Silver 15mm 8 cm Double Sided Satin Metallic Ribbon
Bright White / Silver
BUY

 

You Will Also Need:

Tools_270x250 Paper Trimmer BUY
Tools_270x250 Scoring blade BUY
Useful_270x250

Tape Runner or Double Sided Tape

BUY
Useful_270x250

Hot Melt Glue Gun

BUY

Also a Hole Punch, Ruler and Pencil

Instructions:

  1. Cut a piece of Pearlised Navy Card 21cm x 10.5cm.  Score and fold in half.
  2. Cut a piece of Pearlised Navy Card 10cm x 10cm.
  3. Print “Thank You” on to the Ice Maiden Paper and Cut down to size.  The finished size should be 9.5cm x 9.5cm with the wording set to the bottom.  You should be able to fit 4 printed panels on to each A4 sheet.
  4. Use your double sided tape or tape runner to stick the printed panel on to the navy card panel.
  5. Use your pencil and ruler to make 2 marks on your  panel where you will punch the holes.  One each side, the mark should be 2cm from the side and 2cm from the top.  Use your hole punch to punch holes where you have marked.
  6. Thread the Neve charm on to the ribbon (it is helpful if you cut one end of the ribbon into a slight point so that you can thread it through more easily).
    Push the charm to the centre of the ribbon.
  7. Holding the Neve charm in between the punched holes at the front of the panel, thread each end of the ribbon through the holes you have punched.
    Pulling the ribbon tight, use your glue gun to secure it in place at the back of the panel.
  8. Stick the panel on to the front of your folded thank you card with double sided tape or a tape runner.  Use a small amount of glue from the glue gun at make sure the ribbon sticks firmly.

 

FAVOUR BOX

You Will Need:

 

Pearlised Navy A4 Card. DIY wedding stationery, card making and paper crafts 1/12 sheets of Pearlised Navy Card

 

BUY
1/12 sheet of Ice Maiden paper BUY
 Silver snowflake charm. Dangly silver snowflake. Small hanging snowflake for decorating cards and DIY wedding stationery 1 x Neve Charm  BUY
25mm double faced satin ribbon in navy. Navy satin ribbon . DIY wedding stationery 10cm of navy ribbon BUY
Favour Box in Pearlised White, boxes, favour box, favours, pearlised, white 1 x Pearlised White Favour Box BUY

 

You Will Also Need:

Tools_270x250 Paper Trimmer BUY
Useful_270x250

Tape Runner or Double Sided Tape

BUY
Useful_270x250

Hot Melt Glue Gun

BUY

 

Instructions:

  1. Assemble the top and bottom of your favour box.
  2. Cut a piece of Pearlised Navy Card 5.75cm x 5.75cm.  Stick this to the top of the favour box using double sided tape or a tape runner.
  3. Cut a piece of Ice Maiden Paper 5.25cm x 5.25cm.  Stick this on top of the pearlised navy card panel.
  4. Thread your Neve charm on to the navy ribbon.
  5. Holding the charm in place on the top centre of lid, fold both ends of the ribbon around to the inside of the box and use your glue gun to stick them in to place on the inside.  Make sure that you pull the ribbon tight enough so that it does not sag.
  6. You can now fill the box, put the lid on and you’re ready to go!

 

Breathe, relax and there it is – your Winter Theme Wedding Stationery!

 

//pagead2.googlesyndication.com/pagead/js/adsbygoogle.js

(adsbygoogle = window.adsbygoogle || []).push({});

DIY winter wedding stationery with snowflakes. Make your own winter wedding stationery. Winter wedding stationery ideas. Navy and white wedding stationery with snowflake theme